| - Poly Aluminium Chloride - PAC |
![]() |
![]() |
![]() |
![]() |
|
|
|
A pale yellow hydroscopic powder,
poly aluminum chloride is used in various industrial applications and
requirements. Soluble in water, poly aluminum chloride is used as a
water treatment chemical. The different chemical characteristics and
poly aluminum chloride are given in the table below: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
IDENTIFICATION
PHYSICAL DESCRIPTION/ PROPERTIES
HEALTH HAZARD INFORMATION
Health effects
No adverse health effects expected if the product is
handled in accordance with this Safety Data Sheet and the product label.
Symptoms that may arise if the product is mishandled are:
First Aids
Advice T0 Doctor
Treat symptomatically.
Toxicity
No information available
PRECAUTIONS FOR USE
Exposure standards
No value assigned for this specific material by the
National Occupational Health and Safety Commission (Worksafe Australia).
Engineering controls
Use in a well-ventilated area. Local exhaust
ventilation is recommended.
Personal protection
Avoid skin and eye contact and inhalation of dust.
Wear overalls, eye protection & gloves. Respiratory protection is
required in dusty environment. Use an approved dust mask. Use with
adequate ventilation. Always wash hands before smoking, eating, drinking
or using the toilet.
Flammability
Not flammable SAFE HANDLING INFORMATION
Storage and transport
Not defined as a Dangerous Good by the Australian
Code for the Transport of Dangerous Goods by Road and Rail.
Store in a cool place out of direct sunlight. Store in well ventilated area. Store away from oxidizing agents and foodstuffs. Prevent severe overheating as overheating may produce hydrogen chloride gas. Spills
Wear protective equipment to prevent skin and eye
contamination and inhalation of dust. Sweep up but avoid generating
dust. Collect and place in properly labelled containers for disposal.
Residues may be flushed to drain with large amounts of water if
permitted.
Disposal
Refer to State Land Waste Management Authority.
Fire/explosion hazards
Material is non flammable. On burning will emit
fumes. Fire fighters to wear self-contained breathing apparatus if risk
of exposure to vapour or products of combustion.
Water spray, foam, dry agent (carbon dioxide, dry chemical powder). Environmental impact
No known effects. OTHER INFORMATION AND REFERENCES
Principal references
This chemical is listed on the Australian Inventory
of Chemical Substances (AICS).
CONTACT POINT
This MSDS has been prepared from current technical
data and summarises at the date of issue our best knowledge of the
health and safety information of the product, and in particular how to
safely handle and use the product in the workplace. Each user should
read this MSDS and consider the information in the context of how the
product will be handled and used in the workplace. If clarification or further information is needed to ensure that an appropriate assessment can be made, the user should contact this company. Our responsibility for products sold is subject to our standard terms and conditions, a copy of which is sent to our customers and is also available upon request |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
A pale yellow hydroscopic powder,
poly aluminum chloride is used in various industrial applications and
requirements. Soluble in water, poly aluminum chloride is used as a
water treatment chemical. The different chemical characteristics and
poly aluminum chloride are given in the table below: |
||||||||||||||||||||||||||||||||||
|
Composition, Information on Ingredients
Physical and Chemical Properties
|
||||||||||||||||||||||||||||||||||
|
Site Developed by IndiaMART InterMESH Limited |